LT6230IS6#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6230 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 3.3/5+-5V |
| Number of Circuits | 1 |
| Operating Supply Current | 3.3mA |
| Supply Current-Max | 4.85mA |
| Slew Rate | 70V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 5μA |
| Voltage - Supply, Single/Dual (±) | 3V~12.6V ±1.5V~6.3V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 500μV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 215000 kHz |
| Voltage Gain | 106.02dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 100μV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 215MHz |
| Wideband | YES |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT6230IS6#TRPBF Overview
There is a SOT-23-6 Thin, TSOT-23-6 case in which the instrumentation amplifier is packaged. Buffer amps of this type are called General Purpose-types. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. The number of terminations approaches 6. In this case, there are 6 pins on the board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The buffer op amp includes 6 pins. There is an input offset voltage of 500μV for this buffer op amp. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureUsing an 3.3mA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain at 106.02dB. There are 1 circuits on this op amp. On the output type, there are Rail-to-Rail different types of op amps. The total number of elements in this buffer amplifier is 1. The linear amplifier is packaged by using a TAPE AND REEL axis.
LT6230IS6#TRPBF Features
6 Pins
supply voltage of 5V
106.02dB voltage gain
Output Type: Rail-to-Rail
LT6230IS6#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT6230IS6#TRPBF Instrumentational OP Amps applications.
- Integrator circuits
- Non-polarized electrodes
- pH (acidity)
- Automotive sensors
- Semiconductor detectors
- Ultrasound transducers
- Large motor controllers
- Communication device
- Fission chambers
- E-book readers
