LT6231CS8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Operating Supply Voltage | 12V |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 12.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 3.3mA |
| Slew Rate | 70 V/μs |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 10μA |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 350μV |
| Bandwidth | 200MHz |
| Gain Bandwidth Product | 200MHz |
| Voltage Gain | 106.02dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Max Dual Supply Voltage | 6.3V |
| Min Dual Supply Voltage | 1.5V |
| Dual Supply Voltage | 5V |
| Nominal Gain Bandwidth Product | 215MHz |
| Number of Amplifiers | 2 |
| Height | 1.48mm |
| Length | 5mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT6231CS8#PBF Overview
There is a SOIC case package that contains the instrumentation amplifiers. 8 pins are located on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 350μV. As long as the supply current of the chip does not exceed 3.3mA, this op amp ic can operate. You should keep the voltage gain at 106.02dB for the time being. A instrumentation amplifier like this has 2 circuits. There are a total of 2 channels available on the op amps. This instrumentation amplifier cannot operate below 0°C degrees Celsius. A temperature greater than 70°C should not be used for the operation of buffer amplifier. There is a rating of 2 for the operating supply voltage of the buffer op amp. The operating supply voltage of the buffer op amp is rated at 12V. With regard to the supply voltage, this electrical component is capable of working from under 12.6V. To keep the buffer amps' supply voltage higher than 3V. In order to conduct this part, you will need to provide dual supply voltages of 6.3V volts. A linear amplifier such as this has 2 amplifiers on it.
LT6231CS8#PBF Features
106.02dB voltage gain
LT6231CS8#PBF Applications
There are a lot of Analog Devices, Inc. LT6231CS8#PBF Instrumentational OP Amps applications.
- Integrator circuits
- Home audio systems
- pH (acidity)
- Navigation
- Weighing systems
- RF cable systems
- Switching amplifier
- Video computer boards
- Vehicle electronics
- Information processing
