LT6231IDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6231 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 3.3/5/+-5V |
| Number of Circuits | 2 |
| Operating Supply Current | 3.3mA |
| Supply Current-Max | 9.7mA |
| Slew Rate | 70V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 5μA |
| Voltage - Supply, Single/Dual (±) | 3V~12.6V ±1.5V~6.3V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 75μV |
| Bandwidth | 215MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 215000 kHz |
| Voltage Gain | 106.02dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Length | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT6231IDD#PBF Overview
There is a 8-WFDFN Exposed Pad case in which the instrumentation amplifier is packaged. Op amps are General Purpose types of amplifier on the chip. Instrumentation amplifier is delivered in a Tube case. There have been a total of 8 terminations over the past year. The pins on this board total to 8 in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The op amp ic has an array of 8 pins on it. In terms of input offset voltage, operational amplifier rates 75μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. As long as the supply current of the chip does not exceed 3.3mA, this op amp ic can operate. There should be no change in the voltage gain. There are 2 circuits on op amps. On the output type, there are Rail-to-Rail different types of op amps. There is a rating of 2 for the operating supply voltage of the buffer op amp.
LT6231IDD#PBF Features
8 Pins
supply voltage of 5V
106.02dB voltage gain
Output Type: Rail-to-Rail
LT6231IDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LT6231IDD#PBF Instrumentational OP Amps applications.
- Precision measurement
- Medical imaging
- Tablets
- Cinema or auditorium audio system
- Video conversion and routing
- Exponential operation circuits
- Digital cameras
- Hand-held batteries
- Inverse/same-phase proportional circuit
- Oscilloscopes
