LT6232IGN#PBF
| Parameters | |
|---|---|
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6232 |
| Pin Count | 16 |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 3.3/5+-5V |
| Number of Circuits | 4 |
| Operating Supply Current | 3.3mA |
| Slew Rate | 70V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 5μA |
| Voltage - Supply, Single/Dual (±) | 3V~12.6V ±1.5V~6.3V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 350μV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 215000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 12μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 50μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 12μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Nominal Gain Bandwidth Product | 215MHz |
| Wideband | YES |
| Height Seated (Max) | 1.75mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
LT6232IGN#PBF Overview
Packaging for the buffer amplifier is in the form of a 16-SSOP (0.154, 3.90mm Width) case. This is a General Purpose type op amp. Instrumentation amplifier is delivered in a Tube case. The number of terminations approaches 16. In total, there are 16 pins on this op amp ic. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. To be specific, this instrumentation amplifier is a type of Operational Amplifier. Linear amplifier includes 16 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 350μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, op amp ranges -40°C~85°C. You can run this op amp ic on 3.3mA . Maintain 106.02dB as the voltage gain. In total, there are 4 circuits on this buffer amplifier. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. According to the specifications of the buffer op amp, the operating supply voltage is rated at 4.
LT6232IGN#PBF Features
16 Pins
supply voltage of 5V
106.02dB voltage gain
Output Type: Rail-to-Rail
LT6232IGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LT6232IGN#PBF Instrumentational OP Amps applications.
- High/low-pass filter circuit
- High gain DC amplifier
- Weighing systems
- Image computer boards
- Automotive sensors
- Computer workstations
- Multimedia playback equipment
- Division circuits
- Television
- Gaming industry
