LT6233IS6-10#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6233 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 3.3/5/+-5V |
| Number of Circuits | 1 |
| Operating Supply Current | 1.15mA |
| Slew Rate | 115V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 1.5μA |
| Voltage - Supply, Single/Dual (±) | 3V~12.6V ±1.5V~6.3V |
| Output Current per Channel | 55mA |
| Input Offset Voltage (Vos) | 500μV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 375000 kHz |
| Voltage Gain | 102.92dB |
| Average Bias Current-Max (IIB) | 4μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 100μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 3μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 375MHz |
| Wideband | YES |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT6233IS6-10#TRPBF Overview
Op amp is packaged in SOT-23-6 Thin, TSOT-23-6 case. Op amps are General Purpose types of amplifier on the chip. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations approaches 6. Linear amplifier has a total of 6 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. Linear amplifier includes 6 pins. As far as the input offset voltage is concerned, linear amplifier rates at 500μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . As long as the supply current of the chip does not exceed 1.15mA, this op amp ic can operate. Maintain 102.92dB as the voltage gain. There are 1 circuits on this op amp. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The op amp is rated for an operating supply voltage of 1. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted.
LT6233IS6-10#TRPBF Features
6 Pins
supply voltage of 5V
102.92dB voltage gain
Output Type: Rail-to-Rail
LT6233IS6-10#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT6233IS6-10#TRPBF Instrumentational OP Amps applications.
- Mobile phone
- Multimedia playback equipment
- Weighing systems
- earphone
- Addition operation circuits
- Proportional counter tubes
- Fast A/D and D/A converters
- Inverse/same-phase proportional circuit
- Laptop
- Ultrasound transducers
