Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 months ago) |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 Thin, TSOT-23-6 |
Surface Mount |
YES |
Number of Pins |
6 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2005 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Operational Amplifier |
Packing Method |
TAPE AND REEL |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.95mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
LT6233 |
Pin Count |
6 |
Qualification Status |
Not Qualified |
Output Type |
Rail-to-Rail |
Number of Elements |
1 |
Power Supplies |
3.3/5/+-5V |
Operating Supply Current |
1.15mA |
Slew Rate |
17V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
90 dB |
Current - Input Bias |
1.5μA |
Voltage - Supply, Single/Dual (±) |
3V~12.6V ±1.5V~6.3V |
Output Current per Channel |
55mA |
Input Offset Voltage (Vos) |
500μV |
Gain Bandwidth Product |
60MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
60000 kHz |
Voltage Gain |
102.92dB |
Average Bias Current-Max (IIB) |
4μA |
Power Supply Rejection Ratio (PSRR) |
90dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Voltage - Input Offset |
100μV |
Low-Bias |
NO |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
3μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
375MHz |
Wideband |
NO |
Length |
2.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LT6233IS6#TRPBF Overview
Packaging for the buffer amplifier is in the form of a SOT-23-6 Thin, TSOT-23-6 case. An op amp ic of the General Purpose type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. The number of terminations approaches 6. The total number of pins on linear amplifier is 6. I would like to remind you that this buffer op amp should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The buffer op amp includes 6 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 500μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . An 1.15mA volt supply current is needed for this linear amplifier to operate. It is a member of the 102.92dB's 102.92dB family. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. For the operating supply voltage of the op amp ic, there is a rating of 1. The instrumentation amplifier is packed in the form of TAPE AND REEL.
LT6233IS6#TRPBF Features
6 Pins
supply voltage of 5V
102.92dB voltage gain
Output Type: Rail-to-Rail
LT6233IS6#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT6233IS6#TRPBF Instrumentational OP Amps applications.
- Semiconductor detectors
- Signal transformation
- Video data acquisition
- High-frequency data acquisition systems
- Gaming industry
- Displayers for aircraft and air transportation control systems
- Weighing systems
- Fast A/D and D/A converters
- Subtraction operation circuits
- Large motor controllers