LT6234CDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6234 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 3.3/5/+-5V |
| Number of Circuits | 2 |
| Operating Supply Current | 1.15mA |
| Supply Current-Max | 3.4mA |
| Slew Rate | 17V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 1.5μA |
| Voltage - Supply, Single/Dual (±) | 3V~12.6V ±1.5V~6.3V |
| Output Current per Channel | 55mA |
| Input Offset Voltage (Vos) | 75μV |
| Bandwidth | 60MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 60000 kHz |
| Voltage Gain | 102.92dB |
| Average Bias Current-Max (IIB) | 3.5μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Bias Current-Max (IIB) @25C | 3μA |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Length | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LT6234CDD#PBF Overview
In order to protect the op amps, a 8-WFDFN Exposed Pad case is used. General Purpose-type instrumentation amplifiers are used in this application. Upon delivery, op amp ic is packaged in a Tube case. The number of terminations approaches 8. There are a total of 8 pins on this op amp. I would like to remind you that this buffer op amp should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. It has 8 pins that make up the linear amplifier. Op amp ic rates 75μV for input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . This op amp can operate from a supply current at 1.15mA. You should keep the voltage gain at 102.92dB for the time being. A instrumentation amplifier like this has 2 circuits. On the output type, there are Rail-to-Rail different types of op amps. There is a rating of 2 for the operating supply voltage of the buffer op amp.
LT6234CDD#PBF Features
8 Pins
supply voltage of 5V
102.92dB voltage gain
Output Type: Rail-to-Rail
LT6234CDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LT6234CDD#PBF Instrumentational OP Amps applications.
- Broadcasting
- High/low-pass filter circuit
- pH (acidity)
- Video conversion and routing
- Computer workstations
- Strain gauges
- Navigation
- Active probe
- Test and measurement instruments
- Power control
