LT6234IDD#PBF

2 Channels 30mA per Channel 1.5μA 90 dB Instrumentational OP Amps DFN

Manufacturer: Analog Devices, Inc.
Nocochips NO: 84-LT6234IDD#PBF
Package: DFN
Datasheet: PDF
Stock: 439
Description: 2 Channels 30mA per Channel 1.5μA 90 dB Instrumentational OP Amps DFN(Kg)

Details

Tags

Parameters
Max Dual Supply Voltage	6.3V
Min Dual Supply Voltage	1.5V
Max Junction Temperature (Tj)	125°C
Number of Amplifiers	2
Height	800μm
REACH SVHC	No SVHC
RoHS Status	RoHS Compliant
Lead Free	Lead Free
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Mount	Surface Mount
Package / Case	DFN
Number of Pins	8
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Number of Elements	2
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	12.6V
Min Supply Voltage	3V
Operating Supply Current	1.15mA
Slew Rate	17 V/μs
Common Mode Rejection Ratio	90 dB
Current - Input Bias	1.5μA
Output Current per Channel	30mA
Input Offset Voltage (Vos)	75μV
Bandwidth	60MHz
Gain Bandwidth Product	55MHz
Voltage Gain	102.92dB
Power Supply Rejection Ratio (PSRR)	90dB

LT6234IDD#PBF Overview

Packaged in a DFN case, the buffer op amp is ready to use. 8 pins are located on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 75μV. The buffer amplifier is capable of operating from a supply current of 1.15mA . There should be no change in the voltage gain. The buffer amp consists of 2 circuits in total. Buffer op amp is equipped with 2 channels on the device. The temperature should not be lower than -40°C for operational amplifier ics to operate. It should only be used at temperatures up above 85°C. 2 elements make up the design of this buffer amplifier. With regard tp supply voltage, op amp is used under 12.6V. To keep the buffer amps' supply voltage higher than 3V. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 6.3V volts. On the linear amplifier, there are 2 amplifiers that are used.