LT6235IGN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6235 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 3.3/5/+-5V |
| Number of Circuits | 4 |
| Operating Supply Current | 1.15mA |
| Supply Current-Max | 7mA |
| Slew Rate | 17V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 1.5μA |
| Voltage - Supply, Single/Dual (±) | 3V~12.6V ±1.5V~6.3V |
| Output Current per Channel | 55mA |
| Input Offset Voltage (Vos) | 350μV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 60000 kHz |
| Voltage Gain | 102.92dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 50μV |
| Bias Current-Max (IIB) @25C | 3μA |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Nominal Gain Bandwidth Product | 60MHz |
| Height Seated (Max) | 1.75mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT6235IGN#PBF Overview
The linear amplifier is packaged in a 16-SSOP (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. General Purpose-type instrumentation amplifiers are used in this application. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations is approaching the 16 mark. It consists of a total of 16 pins in total. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. Instrumentation amplifier is a part of Operational Amplifier. In total, the buffer amplifier consists of 16 pins. Regarding input offset voltage, buffer amplifier rates 350μV voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. An 1.15mA volt supply current is needed for this linear amplifier to operate. Maintain 102.92dB as the voltage gain. This op amp ic has 4 circuits. On the output type, there are Rail-to-Rail different types of op amps. For the operating supply voltage of the op amp ic, there is a rating of 4.
LT6235IGN#PBF Features
16 Pins
supply voltage of 5V
102.92dB voltage gain
Output Type: Rail-to-Rail
LT6235IGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LT6235IGN#PBF Instrumentational OP Amps applications.
- Portable docking station
- Signal amplification
- Video data acquisition
- Precision measurement
- Portable electronic products powered by batteries
- Radiation thermometry transducers
- Blood pressure sensors
- Differentiator circuits
- Commercial audio systems
- Information processing
