LT6350HDD#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Surface Mount | YES |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | ADC Driver |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Data Acquisition |
| HTS Code | 8542.39.00.01 |
| Packing Method | TAPE AND REEL |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LT6350 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-N8 |
| Operating Temperature (Max) | 125°C |
| Operating Temperature (Min) | -40°C |
| Temperature Grade | AUTOMOTIVE |
| Supply Current-Max | 8.3mA |
| Slew Rate | 48 V/us |
| Architecture | VOLTAGE-FEEDBACK |
| Common Mode Rejection Ratio | 118 dB |
| Unity Gain BW-Nom | 115000 kHz |
| Average Bias Current-Max (IIB) | 2.6μA |
| Low-Offset | NO |
| Supply Voltage Limit-Max | 12.6V |
| Micropower | NO |
| -3db Bandwidth | 33MHz |
| Programmable Power | NO |
| Input Offset Voltage-Max | 1360μV |
| Wideband | YES |
| Common-mode Reject Ratio-Min | 93 dB |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LT6350HDD#TRPBF Overview
The package consists of a Tape & Reel (TR) shape.There is no doubt that this ADC Driver is a very good value for the price.A package with 8-WFDFN Exposed Pad was dispatched.As part of the mounting process, the part needs to be mounted in the Surface Mount direction in order to be positioned in the right place.The most common application for it is in the Data Acquisition environment.This device's base part number is LT6350.The 1 functions here are used for amplification purposes due to their high performance.This terminal consists of a total of four terminals, each with its own function.In total, there are 8 pins of the part.5V is recommended as the supply voltage for this amplifier.This part can operate at temperatures up to 125°C.Temperatures below -40°C may cause the device to malfunction.As far as bandwidth performance goes, it is 33MHz for -3db.There should be a constant supply current that should not go beyond 8.3mA.
LT6350HDD#TRPBF Features
LT6350HDD#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT6350HDD#TRPBF Special Purpose Amplifiers applications.
- Comparator
- Television
- Proportional operation circuits
- Fission chambers
- Weighing systems
- Information processing
- MP3
- Multiplication and division circuits
- Mobile phone
- Medical instruments
