LT6402CUD-12#PBF

1 Channels 35mA per Channel 5μA 42 dB Instrumentational OP Amps 5V QFN EP

Manufacturer: Analog Devices, Inc.
Nocochips NO: 84-LT6402CUD-12#PBF
Package: QFN EP
Datasheet: PDF
Stock: 642
Description: 1 Channels 35mA per Channel 5μA 42 dB Instrumentational OP Amps 5V QFN EP(Kg)

Details

Tags

Parameters
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Package / Case	QFN EP
Number of Pins	16
Resistance	122Ohm
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Operating Supply Voltage	5V
Number of Elements	1
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	4V
Operating Supply Current	30mA
Slew Rate	400 V/μs
Common Mode Rejection Ratio	42 dB
Current - Input Bias	5μA
Output Current per Channel	35mA
Input Offset Voltage (Vos)	6.5mV
Bandwidth	300MHz
Voltage Gain	12.4dB
Power Supply Rejection Ratio (PSRR)	55dB
-3db Bandwidth	300MHz
Nominal Gain Bandwidth Product	300MHz
RoHS Status	RoHS Compliant

LT6402CUD-12#PBF Overview

The linear amplifier is packaged in a QFN EP case which makes it easy for the consumer to handle. It has 16 pins that make up the linear amplifier. The input offset voltage is 6.5mV. This op amp can operate from a supply current at 30mA. Keeping the voltage gain at 12.4dB is the best course of action. There are 2 circuits on this op amp. There are a total of 1 channels available on the op amps. Using this buffer op amp requires a temperature of at least 0°C. You should only use op amp buffer at temperatures that are no higher than 70°C. For the operating supply voltage of the op amp ic, there is a rating of 1. The operating supply voltage of the buffer op amp is rated at 5V. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 5.5V. As a general rule, it is advisable to keep the op amp's supply voltage above 4V at all times. Op amp resistance should stay within the range of 122Ohm.