banner_page

LT6402CUD-12#TRPBF

1 Channels 35mA per Channel 5μA 42 dB Instrumentational OP Amps 5V QFN EP


  • Manufacturer: Analog Devices, Inc.
  • Nocochips NO: 84-LT6402CUD-12#TRPBF
  • Package: QFN EP
  • Datasheet: PDF
  • Stock: 896
  • Description: 1 Channels 35mA per Channel 5μA 42 dB Instrumentational OP Amps 5V QFN EP(Kg)

Details

Tags

Parameters
Lifecycle Status PRODUCTION (Last Updated: 1 week ago)
Package / Case QFN EP
Number of Pins 16
Resistance 122Ohm
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Operating Supply Voltage 5V
Number of Elements 1
Number of Channels 1
Number of Circuits 2
Max Supply Voltage 5.5V
Min Supply Voltage 4V
Operating Supply Current 30mA
Slew Rate 400 V/μs
Common Mode Rejection Ratio 42 dB
Current - Input Bias 5μA
Output Current per Channel 35mA
Input Offset Voltage (Vos) 6.5mV
Bandwidth 300MHz
Voltage Gain 12.4dB
Power Supply Rejection Ratio (PSRR) 55dB
-3db Bandwidth 300MHz
Nominal Gain Bandwidth Product 300MHz
RoHS Status RoHS Compliant

LT6402CUD-12#TRPBF Overview


There is a QFN EP case package that contains the instrumentation amplifiers. Linear amplifier includes 16 pins. With regard to input offset voltage, instrumentation amplifier is rated at 6.5mV. Using a supply current of 30mA , this buffer op amp will be able to operate. 12.4dB should remain the voltage gain. There are 2 circuits on this op amp. As far as the device is concerned, buffer amplifier has 1 channels. For this linear amplifier to work, the temperature should not be below 0°C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 70°C. This linear amplifier has a total of 1 elements. The operating supply voltage of instrumentation amplifier is rated 5V voltage. The electrical part is capable of being powered by a voltage of under 5.5V, which means that it can be used with any voltage supply. The linear amplifier's supply voltage should be higher than 4V. It is important to keep the resistance within the 122Ohm range of the op amps.

LT6402CUD-12#TRPBF Features


12.4dB voltage gain
Resistance of 122Ohm

LT6402CUD-12#TRPBF Applications


There are a lot of Analog Devices, Inc. LT6402CUD-12#TRPBF Instrumentational OP Amps applications.

  • Communication device
  • Test and measurement instruments
  • Signal amplification
  • ECG equipment
  • Large motor controllers
  • Car stereo
  • Voltage regulation circuit
  • Ultrasound transducers
  • Non-polarized electrodes
  • Radar

Write a review

Note: HTML is not translated!
    Bad           Good