LT6402CUD-20#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Package / Case | QFN |
| Number of Pins | 16 |
| Resistance | 122Ohm |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Operating Supply Current | 30mA |
| Nominal Supply Current | 30mA |
| Slew Rate | 400 V/μs |
| Common Mode Rejection Ratio | 45 dB |
| Current - Input Bias | 5μA |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 6.5mV |
| Bandwidth | 300MHz |
| Voltage Gain | 0.827dB |
| Power Supply Rejection Ratio (PSRR) | 55dB |
| -3db Bandwidth | 300MHz |
| Nominal Gain Bandwidth Product | 300MHz |
| Number of Amplifiers | 1 |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LT6402CUD-20#PBF Overview
The linear amplifier is packaged in a QFN case. An 16-pin op amp ic is included in the package. Regarding input offset voltage, op amp rates 6.5mV. Operational amplifier can operate supply current at 30mA. It is recommended to keep the voltage gain at 0.827dB at all times. In total, there are 2 circuits on this buffer amplifier. There are 1 channels on the operational amplifiers. To operate this buffer amplifier, the temperature must not be lower than 0°C. Linear amplifier shouldn't be used above 70°C degrees. For the operating supply voltage of the op amp ic, there is a rating of 1. The operating supply voltage of the buffer op amp is rated at 5V. This electric component can work from a voltage of under 5.5V as far as supply voltage is concerned. Over 4V is a recommended supply voltage for buffer ampsDuring testing, the instrumentation amplifier resistance should remain within a range of 122Ohm. In total, there are 1 op amps on the device.
LT6402CUD-20#PBF Features
0.827dB voltage gain
Resistance of 122Ohm
LT6402CUD-20#PBF Applications
There are a lot of Analog Devices, Inc. LT6402CUD-20#PBF Instrumentational OP Amps applications.
- High speed sample
- Band-stop filter
- Radiation thermometry transducers
- Biopotential
- Communication device
- ECG equipment
- Communication
- E-book readers
- Active probe
- Displayers for aircraft and air transportation control systems
