LT6402IUD-6#TRPBF

1 Channels 35mA per Channel 5μA 42 dB Instrumentational OP Amps 5V QFN EP

Manufacturer: Analog Devices, Inc.
Nocochips NO: 84-LT6402IUD-6#TRPBF
Package: QFN EP
Datasheet: PDF
Stock: 536
Description: 1 Channels 35mA per Channel 5μA 42 dB Instrumentational OP Amps 5V QFN EP(Kg)

Details

Tags

Parameters
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Package / Case	QFN EP
Number of Pins	16
Resistance	240Ohm
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Operating Supply Voltage	5V
Number of Elements	1
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	4V
Operating Supply Current	30mA
Slew Rate	400 V/μs
Common Mode Rejection Ratio	42 dB
Current - Input Bias	5μA
Output Current per Channel	35mA
Input Offset Voltage (Vos)	6.5mV
Bandwidth	300MHz
Power Supply Rejection Ratio (PSRR)	55dB
-3db Bandwidth	300MHz
Nominal Gain Bandwidth Product	300MHz
RoHS Status	RoHS Compliant

LT6402IUD-6#TRPBF Overview

It is packaged in an QFN EP-case that protects the operational amplifiers from damage. A total of 16 pins are present on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 6.5mV. Using a supply current of 30mA , this buffer op amp will be able to operate. The buffer amp consists of 2 circuits in total. On the buffer amps, there are 1 channels that can be used. To operate this buffer amplifier, the temperature must not be lower than -40°C. It is recommended that op amp be used at temperatures below 85°C. 1 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5V. The electrical part is capable of being powered by a voltage of under 5.5V, which means that it can be used with any voltage supply. The linear amplifier's supply voltage should be higher than 4V. The op amp resistance should stay within the range of 240Ohm.