LT6411CUD#PBF
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6411 |
| Pin Count | 16 |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Number of Circuits | 2 |
| Operating Supply Current | 8mA |
| Max Supply Current | 22mA |
| Slew Rate | 3300V/μs |
| Amplifier Type | General Purpose |
| Current - Input Bias | 17μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~12V ±2.25V~6V |
| Output Current per Channel | 105mA |
| Input Offset Voltage (Vos) | 10mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 56dB |
| Voltage - Input Offset | 3mV |
| Dual Supply Voltage | 3V |
| Nominal Gain Bandwidth Product | 650MHz |
| Height | 750μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 500kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
LT6411CUD#PBF Overview
There is a 16-WFQFN Exposed Pad case package that contains the instrumentation amplifiers. Buffer amps of this type are called General Purpose-types. A Tube case is used to deliver the buffer op amp. It is estimated that there will be at least 16 terminations this year. A total of 16 pins are located on this board. Please take in mind that this instrumentation amplifier should be run at 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. In total, the buffer amplifier consists of 16 pins. There is an input offset voltage of 10mV for this buffer op amp. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. The buffer amplifier is capable of operating from a supply current of 8mA . The buffer amp consists of 2 circuits in total. A benefit of this op amp ic is that it outputs Differential signals, which is one of the many advantages it has to offer. There are 2 elements in total in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 5V voltage. 500kOhm is the range in which the instrumentation amplifier resistance should lie.
LT6411CUD#PBF Features
16 Pins
supply voltage of 5V
Output Type: Differential
Resistance of 500kOhm
LT6411CUD#PBF Applications
There are a lot of Linear Technology/Analog Devices LT6411CUD#PBF Instrumentational OP Amps applications.
- Vehicle electronics
- Proportional operation circuits
- Medical instruments
- Micro signal measurement
- Television
- Radiation thermometry transducers
- Comparator
- Commercial audio systems
- Signal filtering
- Band-stop filter
