LT6411CUD#TRPBF

2 Channels 105mA per Channel 17μA Instrumentational OP Amps QFN EP

Manufacturer: Analog Devices, Inc.
Nocochips NO: 84-LT6411CUD#TRPBF
Package: QFN EP
Datasheet: PDF
Stock: 612
Description: 2 Channels 105mA per Channel 17μA Instrumentational OP Amps QFN EP(Kg)

Details

Tags

Parameters
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Package / Case	QFN EP
Number of Pins	16
Resistance	500kOhm
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Number of Elements	2
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	12.6V
Min Supply Voltage	4.5V
Operating Supply Current	8mA
Slew Rate	3300 V/μs
Current - Input Bias	17μA
Output Current per Channel	105mA
Input Offset Voltage (Vos)	10mV
Power Supply Rejection Ratio (PSRR)	56dB
Max Dual Supply Voltage	6.3V
-3db Bandwidth	650MHz
Min Dual Supply Voltage	2.25V
Nominal Gain Bandwidth Product	650MHz
RoHS Status	RoHS Compliant

LT6411CUD#TRPBF Overview

There is a QFN EP case in which the instrumentation amplifier is packaged. 16 pins are located on the operational amplifiers. Op amp ic rates 10mV for input offset voltage. Operational amplifier can operate supply current at 8mA. A linear amplifier like this has 2 circuits on it. Buffer op amp is equipped with 2 channels on the device. In order for this buffer op amp to function, it should have a temperature of at least 0°C degrees Celsius. It is recommended that op amp be used at temperatures below 70°C. According to the specifications of the buffer op amp, the operating supply voltage is rated at 2. I would like to point out that this electrical component is capable of working from a voltage below 12.6V as far as the power supply is concerned. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 4.5V when using it. This electrical part should be conducted under the dual supply voltage of 6.3V volts when you conduct this part. It is important to keep the resistance within the 500kOhm range of the linear amplifier.