LT6411IUD#TRPBF
| Parameters | |
|---|---|
| Output Type | Differential |
| Number of Elements | 2 |
| Power Supplies | +-5V |
| Number of Circuits | 2 |
| Operating Supply Current | 8mA |
| Supply Current-Max | 14mA |
| Slew Rate | 3300V/μs |
| Amplifier Type | General Purpose |
| Current - Input Bias | 17μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~12V ±2.25V~6V |
| Output Current per Channel | 105mA |
| Input Offset Voltage (Vos) | 10mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 56dB |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 3mV |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Nominal Gain Bandwidth Product | 650MHz |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 500kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6411 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
LT6411IUD#TRPBF Overview
In the package, you will find a 16-WFQFN Exposed Pad-case to contain the op amp ic. This is a General Purpose type op amp. A Tape & Reel (TR) case is used for delivering the op amp. The number of terminations is approaching the 16 mark. There are a total of 16 pins on this op amp. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 16 pins are available on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 10mV. This electronic part is best mounted with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . Using a supply current of 8mA , this buffer op amp will be able to operate. In total, there are 2 circuits on this buffer amplifier. This op amp ic outputs Differential signals, which is one of the many benefits it has. There are a total of 2 elements in this linear amplifier. 500kOhm is the range in which the op amp resistance should lie.
LT6411IUD#TRPBF Features
16 Pins
supply voltage of 5V
Output Type: Differential
Resistance of 500kOhm
LT6411IUD#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT6411IUD#TRPBF Instrumentational OP Amps applications.
- Video conversion and routing
- MP3
- ECG equipment
- Gaming industry
- Instrumentation
- Band-pass filter
- Signal operation
- Logarithmic operation circuits
- Polarized electrodes
- Video computer boards
