LT6551CMS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Applications | Voltage Feedback |
| Subcategory | Audio/Video Amplifiers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6551 |
| Pin Count | 10 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 12V |
| Number of Elements | 4 |
| Supply Voltage-Max (Vsup) | 12.6V |
| Power Supplies | 3.3/5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 8.5mA |
| Output Current | 60mA |
| Quiescent Current | 8.5μA |
| Supply Current-Max | 50mA |
| Slew Rate | 600V/μs |
| Voltage - Supply, Single/Dual (±) | 3V~12.6V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 35mV |
| Bandwidth | 110000 kHz |
| Voltage Gain | 6.65dB |
| Power Supply Rejection Ratio (PSRR) | 40dB |
| -3db Bandwidth | 90MHz |
| Consumer IC Type | VIDEO AMPLIFIER |
| Nominal Gain Bandwidth Product | 110MHz |
| Height | 860μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT6551CMS#PBF Overview
In the form of a Tube, class d amplifier is packaged.Due to space constraints, class d amp's available in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width).This is a good choice for Voltage Feedback because of audio amplifiers high performance.Using the Surface Mount method, audio power amplifier is mounted on the PCB.In order to audio amp, it has the base part number of LT6551.The pin count is 10.There are 10 terminations on digital amplifier.Its -3db bandwidth is 90MHz.I have included this audio power amplifier in Audio/Video Amplifiers.Audio amplifier operates on a supply current of 8.5mA.The board is constructed using 10 pins.Operating temperatures must be lower than 70°C.It is recommended to keep the operating temperature at least 0°C.The current channel count is 1.Consumer IC type VIDEO AMPLIFIER is used in this amplifier.The supply voltage (Vsup) should be kept above 3V for normal operation.12.6V is the maximum supply voltage (Vsup).As a result, the output current is set to 60mA.The supply voltage of 12V is provided while using audio amplifier ic.A voltage of 6.65dB is achieved by the audio amplifier ic.A quiescent current of 8.5μA is consumed by it, and the external environment has no impact on it.In total, 4 elements are present.
LT6551CMS#PBF Features
Audio/Video Amplifiers subcategory
10 pins
1 channels
LT6551CMS#PBF Applications
There are a lot of Linear Technology/Analog Devices LT6551CMS#PBF Video Amps and Modules applications.
- Preamplification and Filtering
- Telematics control unit
- Audio Test and Measurement
- Aftermarket telematics
- Analog and Digital Mixing Consoles
- Automotive head unit
- Car Audio
- External Audio Amplifiers
- Automotive active noise cancellation
- Analog and Digital Mixing Consoles
