banner_page

LT8570IDD#PBF

2.55V 8-Pin LT8570 DC DC Voltage Regulator 1 Outputs 200kHz~1.5MHz Tube 750mA Switch 8-WFDFN Exposed Pad


  • Manufacturer: Linear Technology/Analog Devices
  • Nocochips NO: 471-LT8570IDD#PBF
  • Package: 8-WFDFN Exposed Pad
  • Datasheet: PDF
  • Stock: 255
  • Description: 2.55V 8-Pin LT8570 DC DC Voltage Regulator 1 Outputs 200kHz~1.5MHz Tube 750mA Switch 8-WFDFN Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 2 weeks ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-WFDFN Exposed Pad
Number of Pins 8
Operating Temperature -40°C~125°C TJ
Packaging Tube
Published 2015
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Base Part Number LT8570
Function Step-Up, Step-Up/Step-Down
Number of Outputs 1
Voltage - Input (Max) 40V
Output Voltage 65V
Output Type Adjustable
Voltage - Input (Min) 2.55V
Output Configuration Positive or Negative
Current - Output 750mA Switch
Max Output Voltage 65V
Voltage - Output (Min/Fixed) 3mV 1.204V
Topology Boost, Cuk, SEPIC
Frequency - Switching 200kHz~1.5MHz
Synchronous Rectifier No
Min Output Voltage 1.204V
Voltage - Output (Max) 65V Switch
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant

LT8570IDD#PBF Overview


There is an optimized performance in this voltage regulator because it utilizes the Tube package. Due to DC DC switching regulator's space saving design, this voltage regulator is available in a 8-WFDFN Exposed Pad package. There are 1 outputs configured on this voltage regulator 12v. Adjusting voltage regulator's output pins generate Adjustable output. Surface Mount-mount switching regulator. Voltage regulators should be operated at -40°C~125°C TJ temperature while operating. Voltage regulator's switching frequency reaches 200kHz~1.5MHz. There is no dc to dc voltage regulator's minimum input voltage requirement for this regulator. In this adjusting voltage regulator, the output voltage (Min/Fixed) equates to 3mV 1.204V. The output current of 750mA Switch makes dc to dc voltage regulator feature maximum design flexibility. As far as the voltage input is concerned, DC DC switching regulator can accept up to 40V. DC/DC regulators such as this one belong to the LT8570 family of products. There is a possibility that DC DC switching regulator can give voltage at 65V volts. During switching regulator operation, 8 pins are used. The output voltage of this voltage regulator 12v should at least be set at 1.204V volts at all times. On the basis of the maximum output voltage of 65V Switch, adjusting voltage regulator can be operated easily. The maximum output voltage of this regulator voltage is 65V.

LT8570IDD#PBF Features


1 outputs
8 pins

LT8570IDD#PBF Applications


There are a lot of Linear Technology/Analog Devices LT8570IDD#PBF Voltage Regulators applications.

  • Shearing machines
  • Handheld GPS
  • Injection molding machinery
  • SMT equipment
  • Magnetohydrodynamic power
  • Plate bending machines
  • Wide-range voltage regulation circuits
  • Drilling machines
  • Household control circuits
  • Domestic water pumps

Write a review

Note: HTML is not translated!
    Bad           Good