LT8611EUDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN PUSH-PULL MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT8611 |
| JESD-30 Code | R-PQCC-N24 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Voltage - Input (Max) | 42V |
| Output Voltage | 3.4V |
| Output Type | Adjustable |
| Voltage - Input (Min) | 3.4V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 2.5A |
| Voltage - Output (Min/Fixed) | 0.97V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~2.2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Voltage - Output (Max) | 40V |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LT8611EUDD#PBF Overview
This harley voltage regulator utilizes the Tube package for optimized performance. This harley voltage regulator has 24 terminations. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. The space-saving 24-WFQFN Exposed Pad package is available for this voltage regulator. There are 1 outputs configured on the voltage regulator. This DC DC switching regulator generates Adjustable output on its output pins. There is a switching regulator that is compatible with the Surface Mount mounting. The operating temperature should be kept at -40°C~125°C TJ when the voltage regulator 12v is in operation. A DC-DC switching regulator of this type operates at a switching frequency of 200kHz~2.2MHz. Voltage regulators like this one can operate at least with 3.4V as the dc to dc voltage regulator's minimum input voltage. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.97V. A maximum design flexibility is provided by the 2.5A output current of voltage regulator. As far as the voltage input is concerned, DC DC switching regulator can accept up to 42V. With its peak reflow temperature of NOT SPECIFIED, this voltage regulator is essentially indestructible. I would like to point out that this voltage regulator belongs to the Switching Regulator or Controllers subcategory. There is a DC/DC regulator in this family that belongs to the LT8611 family. A voltage of 3.4V volts can be produced by voltage regulator. By using 40V as the maximum output voltage, adjusting voltage regulator is easy to operate. Switching regulators with ALSO OPERATES IN PUSH-PULL MODE features are highly efficient and stable.
LT8611EUDD#PBF Features
1 outputs
Peak reflow temperature (Cel) of NOT SPECIFIED
ALSO OPERATES IN PUSH-PULL MODE
LT8611EUDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LT8611EUDD#PBF Voltage Regulators applications.
- Sensitive electronic devices
- Printing equipment
- Program control systems
- Low output voltage switching power supply circuits
- Scientific research
- Mobile phones
- Balance equipment
- Injection molding machinery
- Servo drive system
- PSRR circuits
