LT8611EUDD#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN PUSH-PULL MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT8611 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Efficiency | 96 % |
| Voltage - Input (Max) | 42V |
| Output Voltage | 40V |
| Output Type | Adjustable |
| Voltage - Input (Min) | 3.4V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 2.5A |
| Voltage - Output (Min/Fixed) | 0.97V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~2.2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT8611EUDD#TRPBF Overview
It uses the Tape & Reel (TR) package in order to optimize the performance of this voltage regulator. This harley voltage regulator has 24 terminations. There is one type of analog IC that this voltage regulator is equipped with, and that is the SWITCHING REGULATOR type. The harley voltage regulator is available as a 24-WFQFN Exposed Pad package to save space. There are 1 outputs on DC DC switching regulator. As you can see, this DC DC switching regulator generates Adjustable output on its output pins. This voltage regulator 12v fits the Surface Mount mounting. As long as its operating temperature is -40°C~125°C TJ, dc to dc voltage regulator should perform well. In this voltage regulator 12v, the switching frequency is 200kHz~2.2MHz. There is no dc to dc voltage regulator's minimum input voltage requirement for this regulator. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.97V. Featuring a maximum design flexibility of 2.5A, dc to dc voltage regulator has a maximum output current of 2.5A. Voltage regulators' input voltage is limited to 42V. Due to its NOT SPECIFIED high peak reflow temperature, this voltage regulator 12v is virtually indestructible. This voltage regulator is included in the Switching Regulator or Controllers subcategory. This DC/DC regulator belongs to the LT8611 family. Voltage can be produced at 40V volts by voltage regulator. During switching regulator operation, 24 pins are used. Switching regulators with the ALSO OPERATES IN PUSH-PULL MODE feature are more efficient and stable.
LT8611EUDD#TRPBF Features
1 outputs
Peak reflow temperature (Cel) of NOT SPECIFIED
24 pins
ALSO OPERATES IN PUSH-PULL MODE
LT8611EUDD#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT8611EUDD#TRPBF Voltage Regulators applications.
- Injection molding machinery
- Servo drive system
- Constant current circuits
- Series voltage regulation circuits
- Elevator lighting
- Remotely powered electric motors
- Printing equipment
- Computer monitoring equipment of building
- Pipe bending machines
- Arc suppression circuits
