LT8611IUDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN PUSH-PULL MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT8611 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Efficiency | 96 % |
| Voltage - Input (Max) | 42V |
| Output Voltage | 40V |
| Output Type | Adjustable |
| Voltage - Input (Min) | 3.4V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 2.5A |
| Voltage - Output (Min/Fixed) | 0.97V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~2.2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LT8611IUDD#PBF Overview
This harley voltage regulator utilizes the Tube package for optimized performance. Throughout this voltage regulator, there are 24 terminations. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. There is a 24-WFQFN Exposed Pad package available for this voltage regulator, as DC DC switching regulator is space-saving. There are 1 outputs on DC DC switching regulator. On its output pins, this adjusting voltage regulator generates Adjustable output. A Surface Mount mounting is required for this switching regulator. Operating at -40°C~125°C TJ is the recommended temperature for adjusting voltage regulator's operation. The switching frequency of this DC-DC switching regulator reaches 200kHz~2.2MHz. Input voltage 3.4V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. The output voltage of this voltage regulator (Min/Fixed) amounts to 0.97V volts. It features maximum design flexibility due to dc to dc voltage regulator's 2.5A output current. The maximum input voltage of this voltage regulator 12v is 42V. A regulator voltage's peak reflow temperature amounts to NOT SPECIFIED being indestructible. DC DC switching regulator is part of the Switching Regulator or Controllers subcategory and can be found in the Switching Regulator or Controllers category. The LT8611 family of DC/DC regulators includes this DC/DC regulator. Voltage can be produced at 40V volts by voltage regulator. For switching regulator operation, 24 pins are used. Adding the ALSO OPERATES IN PUSH-PULL MODE feature improves this switching regulator's efficiency and stability.
LT8611IUDD#PBF Features
1 outputs
Peak reflow temperature (Cel) of NOT SPECIFIED
24 pins
ALSO OPERATES IN PUSH-PULL MODE
LT8611IUDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LT8611IUDD#PBF Voltage Regulators applications.
- Die casting equipment
- Magnetohydrodynamic power
- Overvoltage protection circuits in TV sets
- Power supplies of electronic gadgets
- Smoke prevention equipment
- Current source circuits
- Drilling machines
- PSRR circuits
- Radio equipment
- Motor controller circuits
