LT8614EUDC#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN, 18 Leads, Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 18 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT8614 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Efficiency | 96 % |
| Voltage - Input (Max) | 42V |
| Output Voltage | 41.8V |
| Output Type | Adjustable |
| Voltage - Input (Min) | 3.4V |
| Input Voltage-Nom | 6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 4A |
| Max Output Voltage | 41.8V |
| Voltage - Output (Min/Fixed) | 0.97V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~3MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 970mV |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LT8614EUDC#TRPBF Overview
This harley voltage regulator utilizes the Tape & Reel (TR) package for optimized performance. This harley voltage regulator has 18 terminations. This regulator voltage is equipped with a type of analog integrated circuit that is called a SWITCHING REGULATOR voltage regulator. Due to DC DC switching regulator's space saving design, this voltage regulator is available in a 20-WFQFN, 18 Leads, Exposed Pad package. 1 outputs of voltage regulator are configured. On the output pins of this DC DC switching regulator, there is a Adjustable output generated. The voltage regulator 12v fits the Surface Mount mounting hole. The operating temperature should be kept at -40°C~125°C TJ when the voltage regulator 12v is in operation. In this voltage regulator 12v, the switching frequency is 200kHz~3MHz. A dc to dc voltage regulator's minimum input voltage of 3.4V is required for this voltage regulator to operate. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 0.97V. Featuring a 4A output current, dc to dc voltage regulator offers maximum design flexibility. Voltage regulator's input voltage can reach 42V. A regulator voltage's peak reflow temperature amounts to NOT SPECIFIED being indestructible. An input voltage of 6V is required for switching regulator operation. I would like to point out that this voltage regulator belongs to the Switching Regulator or Controllers subcategory. As a member of the LT8614 family of DC/DC regulators, this is a DC/DC regulator. Voltage of voltage regulator can be delivered at 41.8V volts. In order to operate voltage regulator, there are 18 pins that must be connected. Ideally this switch regulator should have an output voltage of about 970mV at the very least. There is a maximum output voltage of 41.8V from this voltage regulator 12v.
LT8614EUDC#TRPBF Features
1 outputs
Peak reflow temperature (Cel) of NOT SPECIFIED
18 pins
LT8614EUDC#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT8614EUDC#TRPBF Voltage Regulators applications.
- Serial communication converter
- Flaw detection equipment
- Balance equipment
- Network technology
- Emergency lighting monitoring equipment
- Nuclear power plants
- Arc suppression circuits
- Automatic testing equipment
- Large fire protection systems
- Lathes
