LT8614IUDC#TRPBF
| Parameters | |
|---|---|
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT8614 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Efficiency | 96 % |
| Voltage - Input (Max) | 42V |
| Output Voltage | 41.8V |
| Output Type | Adjustable |
| Voltage - Input (Min) | 3.4V |
| Input Voltage-Nom | 6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 4A |
| Max Output Voltage | 41.8V |
| Voltage - Output (Min/Fixed) | 0.97V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~3MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 970mV |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN, 18 Leads, Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 18 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
LT8614IUDC#TRPBF Overview
For optimal performance, this voltage regulator uses the Tape & Reel (TR) package. As you can see, this harley voltage regulator contains 18 terminations. As a matter of fact, the type of analog IC that this voltage regulator 12v is equipped with is called SWITCHING REGULATOR. This harley voltage regulator is available in the 20-WFQFN, 18 Leads, Exposed Pad package for the purpose of space saving. DC DC switching regulator is configured with 1 outputs. Adjustable outputs are generated on the output pins of this adjusting voltage regulator. This voltage regulator 12v fits the Surface Mount mounting. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~125°C TJ. 200kHz~3MHz is the switching frequency of this DC-DC switching regulator. There is no dc to dc voltage regulator's minimum input voltage requirement for this regulator. DC DC switching regulator's output voltage (Min/Fixed) amounts to 0.97V. DC DC switching regulator's maximum design flexibility comes from its output current of 4A. 42V volts is DC DC switching regulator's maximum input voltage. The peak reflow temperature of this regulator amounts to NOT SPECIFIED to be essentially indestructible. To meet the switching regulator operation requirements, a nominal input voltage of 6V is provided. I would like to point out that this voltage regulator belongs to the Switching Regulator or Controllers subcategory. DC/DC regulators such as this one belong to the LT8614 family of products. There is a possibility that DC DC switching regulator can give voltage at 41.8V volts. During switching regulator operation, 18 pins are used. As a general rule, this voltage regulator 12v should keep its output voltage at least at 970mV. A maximum voltage of 41.8V can be obtained from the regulator voltage.
LT8614IUDC#TRPBF Features
1 outputs
Peak reflow temperature (Cel) of NOT SPECIFIED
18 pins
LT8614IUDC#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT8614IUDC#TRPBF Voltage Regulators applications.
- Mobile phones
- Emergency lighting monitoring equipment
- Telecommunications equipment
- Packaging
- USB circuits
- Motor controller circuits
- Hydraulic presses
- Special machining machine tools
- Grinders
- Window air conditioners
