Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 4 weeks ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-WFQFN Exposed Pad |
Number of Pins |
24 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2011 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
3.4 V REGULATING OUTPUT ALSO AVAILABLE |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
LT8620 |
Function |
Step-Down |
Number of Outputs |
1 |
Voltage - Input (Max) |
65V |
Output Voltage |
64.8V |
Output Type |
Adjustable |
Voltage - Input (Min) |
3.4V |
Input Voltage-Nom |
6V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Output Configuration |
Positive |
Current - Output |
2A |
Max Output Voltage |
64.75V |
Voltage - Output (Min/Fixed) |
0.97V |
Topology |
Buck |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
200kHz~2.2MHz |
Control Technique |
PULSE WIDTH MODULATION |
Synchronous Rectifier |
Yes |
Min Output Voltage |
970mV |
Height Seated (Max) |
0.8mm |
Length |
5mm |
Width |
3mm |
RoHS Status |
ROHS3 Compliant |
LT8620EUDD#TRPBF Overview
For optimal performance, this voltage regulator uses the Tape & Reel (TR) package. Throughout this voltage regulator, there are 24 terminations. There is one type of analog IC that this voltage regulator is equipped with, and that is the SWITCHING REGULATOR type. There is a 24-WFQFN Exposed Pad package available for this voltage regulator, as DC DC switching regulator is space-saving. 1 outputs have been configured in the voltage regulator 12v. On the output pins of this DC DC switching regulator, there is a Adjustable output generated. The voltage regulator 12v fits the Surface Mount mounting hole. Voltage regulators should be operated at -40°C~125°C TJ temperature while operating. 200kHz~2.2MHz is the switching frequency of this DC-DC switching regulator. Regulator 3.4V can operate with dc to dc voltage regulator's minimum input voltage 3.4V. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 0.97V. It features maximum design flexibility due to dc to dc voltage regulator's 2A output current. As far as the voltage input is concerned, DC DC switching regulator can accept up to 65V. A regulator voltage's peak reflow temperature amounts to NOT SPECIFIED being indestructible. An input voltage of 6V is required for switching regulator operation. There is a DC/DC regulator in this family that belongs to the LT8620 family. The adjusting voltage regulator's output voltage is maintain at 64.8V. In order to operate voltage regulator, there are 24 pins that must be connected. There should be at least a 970mV volt output voltage for this switching regulator in order to make it work properly. It provides the adjusting voltage regulator's maximal output voltage of 64.75V. By adding the 3.4 V REGULATING OUTPUT ALSO AVAILABLE feature, this harley voltage regulator is more efficient and stable.
LT8620EUDD#TRPBF Features
1 outputs
Peak reflow temperature (Cel) of NOT SPECIFIED
24 pins
3.4 V REGULATING OUTPUT ALSO AVAILABLE
LT8620EUDD#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT8620EUDD#TRPBF Voltage Regulators applications.
- Geothermal power
- Surge protection circuits
- USB circuits
- Experimental setup
- Industrial controllers
- Computed tomography (CT)
- Surface processing equipment
- Flaw detection equipment
- Refrigerators of central air conditioners
- Printing equipment