LT8705IUHF#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 38-WFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 38 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 1.3V TO 80V |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT8705 |
| JESD-30 Code | R-PQCC-N38 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 6.35V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 2.8V~80V |
| Control Features | Enable, Frequency Control, Soft Start |
| Topology | Buck-Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~400kHz |
| Input Voltage (Max) | 80V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Height Seated (Max) | 0.8mm |
| Length | 7mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
LT8705IUHF#TRPBF Overview
This switching controller fits most application requirements since it is packaged in a 38-WFQFN Exposed Pad package. The dc motor controller is adquate to generate for 2 outputs. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control has a supply voltage and operating voltage of 2.8V~80V. A -40°C~125°C TJ dc switcher is not a problem. This switching controller can switch at 100kHz~400kHz. dc dc regulators can be carried out with Surface Mount. Enable, Frequency Control, Soft Start provides dcdc regulator efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. switching converters terminal (s) are designed to be at QUAD. A variety of 38 terminations are available in dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. Other relevant dc to dc converter ics can be found by searching "LT8705". There is a particular type of Switching Regulator or Controllers in switching converter. As determined by the test statistics, the output voltage of DC regulator is 6.35V. Considering the dc to dc regulator can only accept 80V input voltage, it is important to take note of this. For better satisfaction, the value of DC to DC voltage regulator is ALSO OPERATES IN ADJUSTABLE MODE FROM 1.3V TO 80V.
LT8705IUHF#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 100kHz~400kHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 1.3V TO 80V
LT8705IUHF#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT8705IUHF#TRPBF DC to DC converter applications.
- Various precision measuring detectors
- Solar power plants
- Industrial robots
- Gear/thread machining machines
- Program control systems
- Scientific testing
- Electric heating, lighting
- Telecommunications equipment
- Overvoltage protection circuits in TV sets
- Electric water heaters
