LT8710EFE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Manufacturer Package Identifier | FE-20-05-08-1663-CB |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2014 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 750kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT8710 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Voltage - Supply (Vcc/Vdd) | 4.5V~80V |
| Control Features | Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~750kHz |
| Input Voltage (Max) | 80V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | BUCK-BOOST |
| Max Duty Cycle | 80 % |
| Max Junction Temperature (Tj) | 125°C |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LT8710EFE#PBF Overview
Capsuled in the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller suits most application needs. There is enough capacity in the dc motor controller to generate the output for the 1 input. An enclosure of Tube is used to package the PMIC. The program can handle Transistor Driver dc switching's outputs (s). This dc control operates at 4.5V~80V and has a 4.5V~80V supply voltage. A -40°C~125°C TJ dc switcher is not a problem. There is a switch at 100kHz~750kHz that can be used with this controller. dc dc regulator can be generalized using Surface Mount. For efficient switching control, the dcdc regulator features Enable, Frequency Control, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a DUAL terminal on the switching converters. A variety of terminations with 20 of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. You can find other relevant dc to dc converter ics by searching "LT8710". There are 20 pins on switching converter. dc dc voltage regulators should have a minimum input voltage of 4.5V. It should be fully noted that the dc to dc regulator only accepts 80V input voltage at most. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 80 %. There is 750kHz frequency setting on the switching controller.
LT8710EFE#PBF Features
Transistor Driver Outputs
Switching Frequency: 100kHz~750kHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
Frequency: 750kHz
LT8710EFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LT8710EFE#PBF DC to DC converter applications.
- Flaw detection equipment
- Experimental setup
- Fire elevators
- Computer monitoring equipment of building
- Textile machinery
- Computer rooms
- Milling machines
- Various precision measuring instruments
- Automatic plug-in machines
- Nuclear power plants
