LT8710IFE#PBF
| Parameters | |
|---|---|
| Max Junction Temperature (Tj) | 125°C |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Manufacturer Package Identifier | FE-20-05-08-1663-CB |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2014 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Terminal Pitch | 0.65mm |
| Frequency | 750kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT8710 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Voltage - Supply (Vcc/Vdd) | 4.5V~80V |
| Control Features | Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~750kHz |
| Input Voltage (Max) | 80V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | BUCK-BOOST |
| Max Duty Cycle | 80 % |
LT8710IFE#PBF Overview
Capsuled in the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller can be used for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Packaging for the pmic consists of Tube solid enclosures. The program can handle Transistor Driver dc switching's outputs (s). A 4.5V~80V voltage is supplied to the dc control and used for operating it. Worked in a -40°C~125°C TJ dc switcher before. The switching controller is capable of switching at the 100kHz~750kHz position. dc dc regulator can be generalized using Surface Mount. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control, Soft Start. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . A variety of 20 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. You can find other relevant dc to dc converter ics by searching "LT8710". There are 20 pins on switching converter. This dc dc voltage regulator should be powered by a voltage of 4.5V. The dc to dc regulator is limited to 80V input voltage. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 80 % during power-up and power-down. The switching controller works at a frequency of 750kHz.
LT8710IFE#PBF Features
Transistor Driver Outputs
Switching Frequency: 100kHz~750kHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
Frequency: 750kHz
LT8710IFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LT8710IFE#PBF DC to DC converter applications.
- Digital display device
- ATMs
- Game consoles
- Plate bending machines
- Terrestrial set-top boxes
- Precision electronic equipment
- PSRR circuits
- Automatic plug-in machines
- Large fire protection systems
- Scientific testing
