LTC1050CN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC1050 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Power Supplies | +-5V |
| Number of Circuits | 1 |
| Operating Supply Current | 1mA |
| Supply Current-Max | 2.3mA |
| Slew Rate | 4V/μs |
| Architecture | CHOPPER-STAB |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 114 dB |
| Current - Input Bias | 10pA |
| Voltage - Supply, Single/Dual (±) | 4.75V~16V ±2.38V~8V |
| Input Offset Voltage (Vos) | 500nV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 2500 kHz |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 9V |
| Voltage - Input Offset | 0.5μV |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.000075μA |
| Neg Supply Voltage-Max (Vsup) | -9V |
| Nominal Gain Bandwidth Product | 2.5MHz |
| Height Seated (Max) | 3.937mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1050CN#PBF Overview
Packaging for the buffer amplifier is in the form of a 14-DIP (0.300, 7.62mm) case. An op amp of this type is a Zero-Drift-type. Instrumentation amplifier is delivered in a Tube case. The number of terminations approaches 14. The total number of pins on linear amplifier is 14. It is important to remember that this op amp should be operated at a voltage of 5V volts. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. In total, the buffer amplifier consists of 14 pins. Op amp rates 500nV as input offset voltage. Through Hole is the recommended mounting type for this linear amplifier. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 1mA . On this instrumentation amplifier, there are 1 circuits that are connected together. The op amp is rated for an operating supply voltage of 1.
LTC1050CN#PBF Features
14 Pins
supply voltage of 5V
LTC1050CN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1050CN#PBF Instrumentational OP Amps applications.
- Television
- Medical imaging
- Video computer boards
- Integrator circuits
- Digital cameras
- High/low-pass filter circuit
- Video conversion and routing
- High input resistance broadband
- earphone
- Medical instruments
