LTC1148CS-5#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1148 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3.5V~20V |
| Control Features | Current Limit, Enable |
| Input Voltage (Min) | 3.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.05A |
| Frequency - Switching | Up to 250kHz |
| Input Voltage (Max) | 20V |
| Control Technique | CONSTANT OFF TIME |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 100% |
| Clock Sync | No |
| Length | 8.649mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
LTC1148CS-5#TRPBF Overview
Capsuled in the 14-SOIC (0.154, 3.90mm Width) package, the switching controller suits most application needs. 1 outputs can be generated with the dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. With this function, you can deal with Transistor Driver dc switching's outputs (s). 3.5V~20V is the operating voltage and supply voltage of the dc control. Worked in an dc switcher with a 0°C~70°C TA rating. This switching controller can switch at Up to 250kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. There are a DUAL terminal on the switching converters. 14 terminations with a variety of function. CONSTANT OFF TIME is an example of one of the control techniques these dc dc converter ics adapt. It is inputted with a DC switcher's voltage of 10V. Other relevant dc to dc converter ics will be returned if you search "LTC1148". Switching converter type is specifically Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 3.5V. DC regulator outputs 5V voltage according to the test statistics. The dc to dc regulator can only accept 20V input voltage. As a result, switching converter outputs current to the greatest value possible (0.05A).
LTC1148CS-5#TRPBF Features
Transistor Driver Outputs
Switching Frequency: Up to 250kHz
Current Limit, Enable
CONSTANT OFF TIME
LTC1148CS-5#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC1148CS-5#TRPBF DC to DC converter applications.
- Access control systems
- Combined machine tools
- Laboratories
- Linear guide
- Network technology
- Electric heating, lighting
- Power supplies of electronic gadgets
- Surface processing equipment
- Thermal power
- Remotely powered electric motors
