LTC1148HVCS-5#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1148 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3.5V~20V |
| Control Features | Current Limit, Enable |
| Input Voltage (Min) | 3.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.05A |
| Frequency - Switching | Up to 250kHz |
| Input Voltage (Max) | 20V |
| Control Technique | CONSTANT OFF TIME |
| Supply Current-Max (Isup) | 2.3mA |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 100% |
| Clock Sync | No |
| Length | 8.649mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
LTC1148HVCS-5#TRPBF Overview
Capsuled in the 14-SOIC (0.154, 3.90mm Width) package, the switching controller suits most application needs. There is sufficient capacity to generate switching controller for outputs 1. PMIC packaging is solid with a Tape & Reel (TR) enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. 3.5V~20V is the operating voltage and supply voltage of the dc control. Work well in dc switchers with a 0°C~70°C TA. The switching controller is capable of switching at the Up to 250kHz position. As it has a Surface Mount value, it can be used for general dc dc regulator. Current Limit, Enable is used for efficient switching control in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. An array of 14 terminations of dc switching. These dc dc converter ics adapt several control methods, including CONSTANT OFF TIME. DC switcher's voltage input is 10V. You can find other relevant dc to dc converter ics by searching "LTC1148". In particular, switching converter belongs to the Switching Regulator or Controllers family. 3.5V should be the minimum input voltage for the dc dc voltage regulator. Statistically, DC regulator outputs 5V volts. It should be noted that the dc to dc regulator only accepts 20V voltage as input voltage. 0.05A is the greatest value switching converter outputs as current. In order to ensure proper operation, the controller should not receive more current than 2.3mA.
LTC1148HVCS-5#TRPBF Features
Transistor Driver Outputs
Switching Frequency: Up to 250kHz
Current Limit, Enable
CONSTANT OFF TIME
LTC1148HVCS-5#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC1148HVCS-5#TRPBF DC to DC converter applications.
- Energy management systems
- Access control systems
- Digital display device
- Various precision measuring detectors
- seismic instrument power circuits
- Bending machines
- Low output voltage switching power supply circuits
- Flaw detection equipment
- Analog precision reference circuits
- Automatic plug-in machines
