LTC1159CG-3.3#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1159 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Voltage - Supply (Vcc/Vdd) | 4V~40V |
| Control Features | Current Limit, Enable |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.05A |
| Frequency - Switching | Up to 250kHz |
| Input Voltage (Max) | 40V |
| Control Technique | CONSTANT OFF TIME |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 100% |
| Clock Sync | No |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
LTC1159CG-3.3#PBF Overview
In the 20-SSOP (0.209, 5.30mm Width) package, the switching controller meets most application requirements. For 1 outputs, the dc motor controller is appropriate. An enclosure of Tube is used to package the PMIC. With this function, you can deal with Transistor Driver dc switching's outputs (s). A 4V~40V voltage is supplied to the dc control and used for operating it. Qualified to work in a 0°C~70°C TA dc switcher. With this switching controller, you can switch at Up to 250kHz. dc dc regulators can be carried out with Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Enable. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. There are a DUAL terminal on the switching converters. 20 terminations with various dc switching's functions. These dc dc converter ics adapt several control methods, including CONSTANT OFF TIME. The nominal DC switcher's voltage input is 12V. In addition to "LTC1159", there are other relevant dc to dc converter ics you can find. In particular, switching converter belongs to the Switching Regulator or Controllers family. It is recommended that the input voltage of the dc dc voltage regulator be 4V. Test statistics indicate DC regulator outputs 3.3V voltage. The dc to dc regulator is limited to 40V input voltage. The output of this function is the greatest value of 0.05A.
LTC1159CG-3.3#PBF Features
Transistor Driver Outputs
Switching Frequency: Up to 250kHz
Current Limit, Enable
CONSTANT OFF TIME
LTC1159CG-3.3#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1159CG-3.3#PBF DC to DC converter applications.
- Industrial robots
- PSRR circuits
- Special machining machine tools
- Program control systems
- Photovoltaic power
- Gear/thread machining machines
- Computer application technology
- Hydraulic presses
- Television equipment
- Radio equipment
