LTC1159CS-3.3#PBF
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1159 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 3.3V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Voltage - Supply (Vcc/Vdd) | 4V~40V |
| Control Features | Current Limit, Enable |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.05A |
| Frequency - Switching | Up to 250kHz |
| Input Voltage (Max) | 40V |
| Control Technique | CONSTANT OFF TIME |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 250kHz |
| Duty Cycle (Max) | 100% |
| Clock Sync | No |
| Length | 9.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
LTC1159CS-3.3#PBF Overview
With a 16-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 1. PMIC packaging is solid with a Tube enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's4V~40V is the supply voltage and the operating voltage of the dc control. A 0°C~70°C TA dc switcher is not a problem. There is a switch at Up to 250kHz that can be used with this controller. The Surface Mount value makes it suitable for general dc dc regulator. Featured in the dcdc regulator is Current Limit, Enable which allows efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. The 16 terminations can be used for a wide range of dc switching. It includes CONSTANT OFF TIME as one of the control techniques dc dc converter ic adapts. The nominal DC switcher's voltage input is 12V. LTC1159 can be used to locate other relevant dc to dc converter ics. There are 16 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 4V. DC regulator outputs 3.3V voltage according to the test statistics. The dc to dc regulator can only accept 40V input voltage. There is a maximum frequency of 250kHz for this dc regulators. Current is output to the greatest value of 0.05A.
LTC1159CS-3.3#PBF Features
Transistor Driver Outputs
Switching Frequency: Up to 250kHz
Current Limit, Enable
CONSTANT OFF TIME
LTC1159CS-3.3#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1159CS-3.3#PBF DC to DC converter applications.
- Hydrogen power
- Drilling machines
- Electrical distribution systems
- Computer monitoring equipment of building
- Photovoltaic power
- Wide-range voltage regulation circuits
- Electric heating, lighting
- Automatic plug-in machines
- Post equipment
- Imported equipment
