Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 2 weeks ago) |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
2006 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Switching Regulator or Controllers |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Pitch |
2.54mm |
Base Part Number |
LTC1174 |
Function |
Step-Up, Step-Down, Step-Up/Step-Down |
Number of Outputs |
1 |
Efficiency |
94 % |
Voltage - Input (Max) |
18.5V |
Output Voltage |
18V |
Output Type |
Adjustable |
Voltage - Input (Min) |
4V |
Input Voltage-Nom |
9V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Output Configuration |
Positive or Negative |
Current - Output |
340mA 600mA |
Quiescent Current |
450μA |
Voltage - Output (Min/Fixed) |
1.25V |
Topology |
Buck, Buck-Boost |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
200kHz |
Control Technique |
CONSTANT OFF TIME |
Supply Current-Max (Isup) |
0.6mA |
Synchronous Rectifier |
No |
Height Seated (Max) |
3.937mm |
Width |
7.62mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LTC1174HVCN8#PBF Overview
As a result of the use of the Tube package, the performance of this voltage regulator is optimized. During the development of this harley voltage regulator, 8 terminations were made. There are two types of analog ICs in this voltage regulator 12v: SWITCHING REGULATOR ICs, which are the ones used in older voltage regulator 12vs. There is a 8-DIP (0.300, 7.62mm) package available for this voltage regulator, as DC DC switching regulator is space-saving. 1 outputs of voltage regulator are configured. There are output pins on this DC DC switching regulator that generate Adjustable output. A voltage regulator 12v such as this one fits the Through Hole mounting bracket. This voltage regulator 12v should operate at a temperature of 0°C~70°C TA when operating. This DC-DC switching regulator has a switching frequency of 200kHz. There is no dc to dc voltage regulator's minimum input voltage requirement for this regulator. DC DC switching regulator's output voltage (Min/Fixed) amounts to 1.25V. Featuring a maximum design flexibility of 340mA 600mA, dc to dc voltage regulator has a maximum output current of 340mA 600mA. The maximum input voltage of this voltage regulator 12v is 18.5V. The voltage regulator 12v is designed to provide a nominal input voltage of 9V for operation. The regulator voltage that you are looking at belongs to the subcategory Switching Regulator or Controllers. DC/DC regulators of this type are part of the LTC1174 family of voltage regulator 12vs. A voltage of 18V volts can be produced by voltage regulator. For switching regulator operation, 8 pins are used. External factors have no impact on DC DC switching regulator's ability to consume 450μA A of quiescent current.
LTC1174HVCN8#PBF Features
1 outputs
8 pins
LTC1174HVCN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1174HVCN8#PBF Voltage Regulators applications.
- Servo drive system
- Electrical distribution systems
- Energy management systems
- Surface processing equipment
- Elevator lighting
- Product burn-in
- Handheld GPS
- Various precision measuring detectors
- Electric water heaters
- Imported equipment