LTC1197LCMS8#PBF
| Parameters | |
|---|---|
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1197 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Polarity | Unipolar |
| Power Supplies | 2.7V |
| Configuration | S/H-ADC |
| Number of Channels | 1 |
| Interface | SPI, Serial |
| Max Supply Voltage | 9V |
| Min Supply Voltage | 4V |
| Nominal Supply Current | 800μA |
| Power Dissipation | 2.2mW |
| Number of Bits | 10 |
| Input Type | Differential, Single Ended |
| Architecture | SAR |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Supply Type | Single |
| Reference Type | External |
| Data Interface | SPI |
| Resolution | 1.25 B |
| Sampling Rate | 250 ksps |
| Voltage - Supply, Analog | 2.7V~4V |
| Voltage - Supply, Digital | 2.7V~4V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 250k |
| Output Bit Code | BINARY |
| Linearity Error-Max (EL) | 0.0977% |
| Integral Nonlinearity (INL) | 1 LSB |
| Sample and Hold / Track and Hold | SAMPLE |
| Ratio - S/H:ADC | 1:1 |
| Analog Input Voltage-Max | 2.75V |
| Analog Input Voltage-Min | -0.05V |
| Conversion Time-Max | 2.9μs |
| Height | 860μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 25mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
LTC1197LCMS8#PBF Overview
The analogue to digital converter is designed with 10 Bits.The AD converter is embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 8 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 2.7V.The A/D converter has 1 channels.The is equipped with 8 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at 0°C~70°C.The number of samples of audio recorded every second is 250k Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~4V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.25 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to LTC1197 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.There are several types of supply that can be categorized according to Single.The supply/digital voltage of this electrical AD converter is 2.7V~4V.Surface Mount is a device that can be mounted on the digital converter.The ADC converter operates with the maximal supply voltage of 9V.It operates with the minimal supply voltage of 4V.The maximal analog input voltage of this electrical AD converter is 2.75V.The ADC converter operates from 2.7V power supplies.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 2.2mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 25mW.The number of channels is growing strong/weak: 1.The minimal analog input voltage of this electrical AD converter is -0.05V.
LTC1197LCMS8#PBF Features
1 Functions
8 basic kinds of terminations
8 pin count
Minimal supply voltage of 4V
2.7V power supplies
LTC1197LCMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1197LCMS8#PBF ADC applications.
- Communication test equipment
- Displaying
- Smart antenna systems
- Automotive
- Multiplexed Data Acquisition Systems
- Handheld Terminal Interface
- Telecommunications
- Cell Phones
- Digital signal processing
- 4-channel data acquisition
