LTC1288IS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Power Dissipation | 500mW |
| Base Part Number | LTC1288 |
| Pin Count | 8 |
| Operating Supply Voltage | 3V |
| Number of Elements | 1 |
| Polarity | Unipolar |
| Configuration | MUX-S/H-ADC |
| Interface | SPI, Serial |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 500mW |
| Number of Bits | 12 |
| Input Type | Single Ended |
| Architecture | SAR |
| Number of Inputs | 2 |
| Supply Type | Single |
| Reference Type | External |
| Data Interface | SPI |
| Resolution | 1.5 B |
| Sampling Rate | 6.6 ksps |
| Voltage - Supply, Analog | 2.7V~6V |
| Voltage - Supply, Digital | 2.7V~6V |
| Sampling Rate (Per Second) | 6.6k |
| Integral Nonlinearity (INL) | 2 LSB |
| Ratio - S/H:ADC | 1:1 |
| Differential Nonlinearity | 0.75 LSB |
| Height | 1.5mm |
| Length | 5mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1288IS8#PBF Overview
The analogue to digital converter is designed with 12 Bits.The AD converter is embedded in the 8-SOIC (0.154, 3.90mm Width) package.The ADC converter is packaged in the way of Tube.The is equipped with 8 pin count.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at 0°C~70°C.The number of samples of audio recorded every second is 6.6k Hz.The input type of this electronic AD converter is Single Ended.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The architecture that analogue to digital converter's core adopts is SAR.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~6V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.5 B, which is on a display or in a camera sensor (specifically in a digital image).It belongs to LTC1288 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Single can be used to categorize supply types.The supply/digital voltage of this electrical AD converter is 2.7V~6V.The ADC converter is possible to mount the device with the help of Surface Mount.The ADC converter operates with the maximal supply voltage of 6V.2 inputs are employed.It operates with the minimal supply voltage of 2.7V.This electrical digital converter operates from a supply voltage of 3V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 500mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 500mW.The ADC converter consists of 1 elements.
LTC1288IS8#PBF Features
8 pin count
Minimal supply voltage of 2.7V
1 elements
LTC1288IS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1288IS8#PBF ADC applications.
- Medical Imaging
- Communication Systems
- Multicarrier, multimode digital receivers
- 3-phase power control
- Microcontrollers.
- RADAR processing, digital oscilloscopes
- Transducer
- In-building wireless telephony
- Digital beam-forming systems for ultrasound
- Digital signal processing
