banner_page

LTC1314CS#TRPBF

N-Channel PMIC LTC1314 5V 14-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Linear Technology/Analog Devices
  • Nocochips NO: 471-LTC1314CS#TRPBF
  • Package: 14-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 830
  • Description: N-Channel PMIC LTC1314 5V 14-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Width 3.9mm
RoHS Status ROHS3 Compliant
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Operating Temperature 0°C~70°C TA
Packaging Tape & Reel (TR)
Published 1996
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Additional Feature CAN ALSO OPERATE AT 5V
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number LTC1314
Pin Count 14
Number of Outputs 1
Qualification Status Not Qualified
Output Type N-Channel
Supply Voltage-Max (Vsup) 5.5V
Supply Voltage-Min (Vsup) 4.5V
Interface On/Off
Current - Output (Max) 120mA
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) 4.5V~5.5V
Switch Type PCMCIA Switch
Ratio - Input:Output 2:1
Voltage - Load 0V~12.6V
Turn On Time 0.5 µs
Output Peak Current Limit-Nom 0.12A
Rds On (Typ) 550m Ω
High Side Driver NO
Turn Off Time 0.03 µs
Length 8.65mm

LTC1314CS#TRPBF Overview


It is packaged in the manner of a Tape & Reel (TR).It's included in the 14-SOIC (0.154, 3.90mm Width) package.The LED driver is mounted as Surface Mount.There is a switch type of PCMCIA Switch.In order to guarantee reliable performance, the temperature should be set to 0°C~70°C TA.There is a default setting of 1 for output.The LED driving board operates with a supply voltage of 4.5V~5.5V.There is a maximum output voltage of N-Channel volts.I believe it belongs to the LTC1314 family.There are 14 terminations in it.It is important to note that the LED driving board has 1 functions.In terms of output, the lighting driver can provide a maximum of 120mA V.Supply voltages of 5V allow for high efficiency.It is equipped with a total of 14 pins.Vsup (maximum supply voltage) is set to 5.5V.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 4.5V.This LED driver can also produce CAN ALSO OPERATE AT 5V.

LTC1314CS#TRPBF Features


Supplied from 5V
Additional features like CAN ALSO OPERATE AT 5V

LTC1314CS#TRPBF Applications


There are a lot of Linear Technology/Analog Devices LTC1314CS#TRPBF Power Switches ICs applications.

  • USB3.1 Power Delivery
  • Low Voltage I/O System Power
  • Handheld Devices
  • Hot-Swap Systems
  • Mobile Communication Devices
  • Wireless Headsets
  • Portable GPS
  • Portable GPS Device
  • Solid State Drivers
  • Portable/Handheld Devices

Write a review

Note: HTML is not translated!
    Bad           Good