LTC1380CGN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 400Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1380 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 10μA |
| Power Dissipation | 500mW |
| Throw Configuration | DPST |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual |
| Supply Current-Max (Isup) | 0.02mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 5V |
| On-State Resistance (Max) | 70Ohm |
| Min Dual Supply Voltage | 1.35V |
| Dual Supply Voltage | 3V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 26pF |
| On-state Resistance Match-Nom | 24Ohm |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1.2μs |
| Charge Injection | 1pC |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.065A |
| Voltage - Supply, Dual (V±) | ±5V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1380CGN#PBF Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SSOP (0.154, 3.90mm Width). The advanced packaging method Tube provides high reliability. In Surface Mount, this analog switch is mounted. 8:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around 0°C~70°C TA. A total of 16 terminations have been recorded. As a result of its 8 channels, this electronic component provides high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. There are 16 pins injected into the electronic part body. A total of 1 circuits make up this switch device. Try searching with LTC1380 to find analog multiplexer variants. The internal resistance of this digital multiplexer is 400Ohm. You can find the functions of the 16 pins in the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 10V. An effective Dual supply digital multiplexer. The lowest voltage the electronic part should receive is 2.7V. For this digital switch to work, 10μA current would suffice. Despite this switch device's dual supply capability, its voltage should not exceed 5V. When using dual power supplies, you should attach at least 1.35V. A 8 input needs to be operated.
LTC1380CGN#PBF Features
8 Channels
10μA Supply Current
LTC1380CGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1380CGN#PBF Analog Switches & Multiplexers ICs applications.
- Audio and video switching
- ISDN NT1/TA
- Precision test equipment
- SDH/SONET multiplexers
- Audio and video signal routing
- Isolation
- Communication systems
- Multiplexers
- Cable Modem
- Audio and video routing
