LTC1380IS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 400Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1380 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 10μA |
| Power Dissipation | 500mW |
| Throw Configuration | DPST |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual |
| Supply Current-Max (Isup) | 0.02mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 5V |
| On-State Resistance (Max) | 70Ohm |
| Min Dual Supply Voltage | 1.35V |
| Dual Supply Voltage | 3V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 26pF |
| On-state Resistance Match-Nom | 14Ohm |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1.2μs |
| Charge Injection | 1pC |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.065A |
| Voltage - Supply, Dual (V±) | ±5V |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1380IS#PBF Overview
As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. Advanced packaging method Tube is used to provide high reliability. There is an analog multiplexer mounted in position Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 16. A 8 channel electronic part produces high-quality output. When the electronic component is given a voltage of 5V, it should be turned on and run. A total of 16 pins are injected into the body of the electronic part. It consists of 1 circuits. Try searching for the analog switch ic with LTC1380 if you are looking for variants. This digital multiplexer has 400Ohm internal resistance. The functions of 16 pins can be found in the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 10V. The digital multiplexer has a low cost Dual supply. A low voltage of 2.7V should be applied to the electronic component. This multiplexer would work with 10μA current. There is no problem with using dual supply voltage, but it should not exceed 5V. A dual power supply should have at least 1.35V voltage attached. The 8 inputs need to be operated in order to work.
LTC1380IS#PBF Features
8 Channels
10μA Supply Current
LTC1380IS#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1380IS#PBF Analog Switches & Multiplexers ICs applications.
- HDTV
- Frame Relay Equipment
- ISDN NT1/TA
- Medical systems
- CSU
- Communication systems
- Medical Instrumentation
- USB 1.1 signal switching circuits
- High reliability control systems
- Power routing
