LTC1390CN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 255Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | LTC1390 |
| Pin Count | 16 |
| Operating Supply Voltage | 3V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Operating Supply Current | 200nA |
| Power Dissipation | 500mW |
| Throw Configuration | DPST |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 7.5V |
| On-State Resistance (Max) | 75Ohm |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 10pF |
| Switch Time (Ton, Toff) (Max) | 400ns, 200ns |
| Charge Injection | 2pC |
| Switch-on Time-Max | 400ns |
| Switch-off Time-Max | 200ns |
| Voltage - Supply, Dual (V±) | ±5V |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1390CN#PBF Overview
Packed in 16-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. High reliability is ensured by the advanced packaging method Tube. A switch device like this is mounted in Through Hole. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Extended operating temperature around 0°C~70°C TA. Totally, there are 16 terminations. A high-quality output is provided by the electrical component's 8 channels. With a 5V voltage supply, the electrical component should be turned on and run. The electronic part body is injected with 16 pins. This multiplexer is composed of 1 circuits. If you are looking for variants of the digital switch, trying search with LTC1390. It has an internal resistance of 255Ohm. Datasheets for functions of 16 pins are available. The digital multiplexer has a low cost Dual, Single supply. The switch device would be able to operate with 200nA current. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 7.5V. 3V operating voltages are supported by the electronic component. Among the inputs that can be operated are the 8 inputs.
LTC1390CN#PBF Features
8 Channels
200nA Supply Current
LTC1390CN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1390CN#PBF Analog Switches & Multiplexers ICs applications.
- Automatic test equipment
- Battery Powered Systems
- New designs requiring multiplexer functions
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Video switching
- SONET/SDH ADM
- PDH Multiplexers
- Optical Applications
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Multi-Line E1 Interface Cards
