LTC1391CN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 300Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | LTC1391 |
| Pin Count | 16 |
| Operating Supply Voltage | 2.7V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Operating Supply Current | 200nA |
| Power Dissipation | 500mW |
| Throw Configuration | DPST |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.04mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 7.5V |
| On-State Resistance (Max) | 75Ohm |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Time (Ton, Toff) (Max) | 400ns, 200ns |
| Charge Injection | 2pC |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 400ns |
| Switch-off Time-Max | 200ns |
| Voltage - Supply, Dual (V±) | ±5V |
| Height Seated (Max) | 3.937mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1391CN#PBF Overview
Shipping overseas is convenient due to the electrical component's packing in 16-DIP (0.300, 7.62mm). High reliability is achieved by using advanced packaging method Tube. In Through Hole, you'll find this switch device. 8:1 is the ratio of multiplexer to demultiplexer circuits. Around 0°C~70°C TA is the extended operating temperature. In total, 16 terminations have occurred. As a result of its 8 channels, this electronic component provides high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. It is part of the design of the 16 series that this electronic component is included. There are 1 circuits in this multiplexer. If you are looking for variants of the digital switch, trying search with LTC1391. The internal resistance of this digital multiplexer is 300Ohm. You can find the functions of the 16 pins in the datasheets. Analog switch ics with Dual, Single supply type are cost-effective. This multiplexer would work with 200nA current. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 7.5V. A voltage of 2.7V can be used to operate the electronic component. The electrical component supports 8 inputs.
LTC1391CN#PBF Features
8 Channels
200nA Supply Current
LTC1391CN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1391CN#PBF Analog Switches & Multiplexers ICs applications.
- DVD-R
- Audio and video routing
- Avionics
- PDAs
- Medical systems
- Microprocessor controlled systems
- CSU
- Battery-powered systems
- Avionics test equipment
- Video switching
