Parameters |
Max Dual Supply Voltage |
7.5V |
On-State Resistance (Max) |
75Ohm |
Dual Supply Voltage |
5V |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
70 dB |
Current - Leakage (IS(off)) (Max) |
5nA |
Channel Capacitance (CS(off), CD(off)) |
5pF 10pF |
On-state Resistance Match-Nom |
15Ohm |
Switch Time (Ton, Toff) (Max) |
400ns, 200ns |
Charge Injection |
2pC |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
400ns |
Switch-off Time-Max |
200ns |
Drain to Source Resistance |
350Ohm |
Voltage - Supply, Dual (V±) |
±5V |
Length |
9.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 2 weeks ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
2004 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
300Ohm |
Terminal Finish |
Matte Tin (Sn) |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
LTC1391 |
Pin Count |
16 |
Operating Supply Voltage |
2.7V |
Number of Channels |
8 |
Number of Circuits |
1 |
Operating Supply Current |
200nA |
Nominal Supply Current |
15μA |
Power Dissipation |
500mW |
Throw Configuration |
DPST |
Logic Function |
Multiplexer |
Number of Inputs |
8 |
Supply Type |
Dual, Single |
Supply Current-Max (Isup) |
0.04mA |
Neg Supply Voltage-Nom (Vsup) |
-5V |
LTC1391CS#PBF Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). High reliability is provided by advanced packaging method Tube. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 8:1. The operating temperature is extended to around 0°C~70°C TA. Totally, there are 16 terminations. A electrical component with 8 channels is capable of high-quality output. Turning on and running the electrical part should be easy with a 5V voltage supply. A total of 16 pins are injected into the body of the electronic part. It consists of 1 circuits. Try searching for the analog switch ic with LTC1391 if you are looking for variants. A 300Ohm internal resistance characterizes this multiplexer. For functions related to 16 pins, please refer to the datasheets. The analog switch ic is of the Dual, Single supply type and is cost-effective. This digital switch can be operated with a current of 200nA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 7.5V. 2.7V operating voltages are supported by the electronic component. A 8 input needs to be operated. Resistivity from Drain to Source is 350Ohm for this electronic part.
LTC1391CS#PBF Features
8 Channels
200nA Supply Current
Drain-to-Source resistance: 350Ohm
LTC1391CS#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1391CS#PBF Analog Switches & Multiplexers ICs applications.
- HDTV
- Remote wireless modules
- Channelized and Unchannelized DS3 applications
- High reliability control systems
- Industrial
- Medical systems
- Signal routing between systems
- Video switching
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Sample-and-hold systems