LTC1391IGN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 300Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1391 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Interface | Serial |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 200nA |
| Nominal Supply Current | 15μA |
| Power Dissipation | 500mW |
| Number of Bits | 12 |
| Throw Configuration | DPST |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.04mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 7.5V |
| On-State Resistance (Max) | 75Ohm |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 10pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Time (Ton, Toff) (Max) | 400ns, 200ns |
| Charge Injection | 2pC |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 400ns |
| Switch-off Time-Max | 200ns |
| Voltage - Supply, Dual (V±) | ±5V |
| Length | 4.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1391IGN#PBF Overview
This electronic part is conveniently packaged in 16-SSOP (0.154, 3.90mm Width), making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 16. The electronic part provides high-quality output because it has 8 channels. An 5V voltage supply should allow the electrical part to be turned on and run. The electronic part body is injected with 16 pins. There are 1 circuits in this multiplexer. LTC1391 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 300Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. The digital multiplexer has a low cost Dual, Single supply. It is recommended to use 2.7V as the lowest voltage for the electrical part. An operating current of 200nA would be sufficient for this switch device. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 7.5V. A 8 input needs to be operated. The switch device is capable of conducting in a 12-bit mode.
LTC1391IGN#PBF Features
8 Channels
200nA Supply Current
12-Bit
LTC1391IGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1391IGN#PBF Analog Switches & Multiplexers ICs applications.
- Medical systems
- Channel Banks
- High reliability control systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- SDH
- Avionics test equipment
- Remote Powered Equipment
- Multiplexers
- 65 V DACs
- Automotive applications
