LTC1393CGN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 400Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1393 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Operating Supply Current | 10μA |
| Throw Configuration | 4PST |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2.7V ±5V |
| Supply Type | Dual |
| On-State Resistance (Max) | 70Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 18pF |
| On-state Resistance Match-Nom | 28Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1.2μs |
| Charge Injection | 1pC |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 1500ns |
| Signal Current-Max | 0.065A |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1393CGN#PBF Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SSOP (0.154, 3.90mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 4:1. Operational temperature extended around 0°C~70°C TA. In total, 16 terminations have occurred. A 4 channel electronic part produces high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. It is part of the design of the 16 series that this electronic component is included. These analog multiplexers are built based on SP4T switching circuits. Circuits number 2 make up this analogue multiplexer. Search with LTC1393 if you are looking for analog multiplexer variants. An switch multiplexer with 400Ohm internal resistance has a value of 400Ohm. For details about the functions of 16 pins, please refer to the datasheets. A cost-effective Dual supply type analogue multiplexer. This digital switch can be operated with a current of 10μA.
LTC1393CGN#PBF Features
4 Channels
Switch Circuit: SP4T
10μA Supply Current
LTC1393CGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1393CGN#PBF Analog Switches & Multiplexers ICs applications.
- Cross Connects
- Sample-and-hold systems
- DVD-R
- PCMCIA cards
- Switching Systems
- SDH/SONET multiplexers
- PDH Multiplexers
- Intelligent PBX
- Industrial and process control systems
- Industrial
