LTC1393CS#PBF
| Parameters | |
|---|---|
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 400Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1393 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 10μA |
| Nominal Supply Current | 10μA |
| Power Dissipation | 500mW |
| Throw Configuration | 4PST |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual |
| On-State Resistance (Max) | 70Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 18pF |
| On-state Resistance Match-Nom | 28Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1.2μs |
| Charge Injection | 1pC |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.065A |
| Voltage - Supply, Dual (V±) | ±5V |
| Length | 9.9mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
LTC1393CS#PBF Overview
Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tube is used. In Surface Mount, you'll find this switch device. 4:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around 0°C~70°C TA. Total terminations are 16. A 1 channel electronic part produces high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. The electronic part body is injected with 16 pins. Unlike digital switches, these are based on SP4T switching circuits. The multiplexer consists of 2 circuits. Try searching with LTC1393 if you're looking for variants. The internal resistance of this digital multiplexer is 400Ohm. The functions of 16 pins can be found in the datasheets. In normalcircumstances, users should not exceed 10V volts for the multiplexer. Digital switch that provides Dual power at a cost-effective price. A low voltage of 2.7V should be applied to the electronic component. An operating current of 10μA would be sufficient for this switch device. The electrical component supports 8 inputs.
LTC1393CS#PBF Features
1 Channels
Switch Circuit: SP4T
10μA Supply Current
LTC1393CS#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1393CS#PBF Analog Switches & Multiplexers ICs applications.
- Audio/video switches
- Sample-and-hold systems
- FTTH
- Mechanical reed relay replacement
- Optical Applications
- Modems
- Precision instrumentation
- Industrial and process control systems
- Precision test equipment
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
