LTC1393IS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 400Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1393 |
| Pin Count | 16 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 10μA |
| Nominal Supply Current | 10μA |
| Power Dissipation | 500mW |
| Throw Configuration | 4PST |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual |
| On-State Resistance (Max) | 70Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 18pF |
| On-state Resistance Match-Nom | 28Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1.2μs |
| Charge Injection | 1pC |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.065A |
| Voltage - Supply, Dual (V±) | ±5V |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1393IS#PBF Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). Advanced packaging method Tube is used to provide high reliability. It is mounted in the position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Extended operating temperature around -40°C~85°C TA. 16 terminations have been made so far. High-quality output is provided by the electronic component's 1 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. A SP4T switching circuit is used for these analog switches. The circuits in this analogue multiplexer number 2. If you are looking for variants of the digital switch, trying search with LTC1393. There is 400Ohm internal resistance in this digital multiplexer. The functions of 16 pins can be found in the datasheets. normally, users should not supply switches with voltages higher than 10V. A cost-effective Dual supply type analogue multiplexer. It is recommended to use 2.7V as the lowest voltage for the electrical part. In order to operate this switch device, it would need a current of 10μA. Operating the 8 inputs requires 8 inputs.
LTC1393IS#PBF Features
1 Channels
Switch Circuit: SP4T
10μA Supply Current
LTC1393IS#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1393IS#PBF Analog Switches & Multiplexers ICs applications.
- Routers
- Automotive applications
- Avionics and Military Systems
- Medical
- Audio signal routing
- Cell phones
- Data Acquisition Systems
- Precision data acquisition
- Audio and video switching
- Digital cross connects (DSX-1)
