LTC1393IS#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC1393 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2.7V ±5V |
| On-State Resistance (Max) | 70Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 18pF |
| On-state Resistance Match-Nom | 28Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 1.5μs, 1.2μs |
| Charge Injection | 1pC |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 1500ns |
| Signal Current-Max | 0.065A |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
LTC1393IS#TRPBF Overview
Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. This packaging method provides high reliability because it uses advanced packaging techniques. It is mounted in the position Surface Mount. There is 4:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. Totally, there are 16 terminations. A high-quality output is provided by the electrical component's 4 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. An electrical component of this type can be found in the 16 series. Multiplexers built on a SP4T switching circuit are built. There are 2 circuits in this switch device. Try searching with LTC1393 to find analog multiplexer variants. It is a typical Multiplexer or Switches analog multiplexer. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC.
LTC1393IS#TRPBF Features
4 Channels
Switch Circuit: SP4T
LTC1393IS#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC1393IS#TRPBF Analog Switches & Multiplexers ICs applications.
- Relay Replacement
- Digital cross connects (DSX-1)
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Optical Applications
- Battery Powered Systems
- Cable PC
- Cross Connects
- Low-Voltage
- Cell phones
- High speed data transmission line cards
