LTC1407AIMSE-1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Feature | Simultaneous Sampling |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 14mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1407 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3V |
| Number of Elements | 1 |
| Polarity | Bipolar |
| Power Supplies | 3V |
| Configuration | S/H-MUX-ADC |
| Interface | SPI, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 100mW |
| Number of Bits | 14 |
| Input Type | Differential, Single Ended |
| Architecture | Pipelined |
| Number of Inputs | 2 |
| Converter Type | ADC, PROPRIETARY METHOD |
| Supply Type | Single |
| Reference Type | External, Internal |
| Data Interface | SPI |
| Resolution | 1.75 B |
| Sampling Rate | 3 Msps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 2.7V~3.6V |
| Number of Analog In Channels | 2 |
| Sampling Rate (Per Second) | 3M |
| Integral Nonlinearity (INL) | 4 LSB |
| Sample and Hold / Track and Hold | SAMPLE |
| Ratio - S/H:ADC | 2:1 |
| Conversion Time-Max | 0.66μs |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1407AIMSE-1#PBF Overview
The analogue to digital converter is designed with 14 Bits.The AD converter is embedded in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 10 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 2 channels.The is equipped with 10 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, PROPRIETARY METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 3M Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-MUX-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is Pipelined.There are 10 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~3.6V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.75 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to LTC1407 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.The supply type of this electronic ADC converter is Single.The supply/digital voltage of this electrical AD converter is 2.7V~3.6V.It is possible to mount the analogue to digital converter using Surface Mount.The ADC converter operates with the maximal supply voltage of 3.6V.2 inputs are employed.It operates with the minimal supply voltage of 2.7V.This electrical digital converter operates from a supply voltage of 3V.The ADC converter operates from 3V power supplies.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 100mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 14mW.Simultaneous Sampling can be ensured when operating.The ADC converter consists of 1 elements.
LTC1407AIMSE-1#PBF Features
1 Functions
10 basic kinds of terminations
10 pin count
Minimal supply voltage of 2.7V
3V power supplies
1 elements
LTC1407AIMSE-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1407AIMSE-1#PBF ADC applications.
- Automotive
- Scientific instruments
- Uninterrupted Power Supplies
- Digital beam-forming systems for ultrasound
- Communications
- Multiplexed Data Acquisition Systems
- Battery Operated Systems
- Cell Phones
- Multicarrier, multimode digital receivers
- Medical Instrumentation and medical imaging
