LTC1435AIS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1435 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 9V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 2kA |
| Voltage - Supply (Vcc/Vdd) | 3.5V~30V |
| Control Features | Enable, Soft Start |
| Input Voltage (Min) | 3.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 400kHz |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 138kHz |
| Duty Cycle (Max) | 99% |
| Clock Sync | No |
| Height | 1.5mm |
| Length | 10.01mm |
| Width | 3.99mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1435AIS#PBF Overview
Capsuled in the 16-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 1. Tube solid enclosure protects the pmic. The system can process Transistor Driver dc switching's outputs (s). 3.5V~30V is the operating voltage and supply voltage of the dc control. Qualified to work in an dc switcher with -40°C~85°C TA. Using this switching controller, it is possible to switch at Up to 400kHz. Surface Mount makes it suitable for general dc dc regulator. Featured in the dcdc regulator is Enable, Soft Start which allows efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. A switching converters's terminal (s) sits at the DUAL position. An array of 16 terminations of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's voltage input is 15V. Other relevant dc to dc converter ics can be found by searching "LTC1435". The switching converter has a total of 16 pins. Switching converter is a type of Switching Regulator or Controllers in particular. The minimum input voltage of the dc dc voltage regulator should be 3.5V. As determined by the test statistics, the output voltage of DC regulator is 9V. It should be fully noted that the dc to dc regulator only accepts 30V input voltage at most. It's important to remember that the dc dc regulator's normaloutput current is 2kA, so you should note it down when starting a new project. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. There is a maximum frequency of 138kHz for this dc regulators.
LTC1435AIS#PBF Features
Transistor Driver Outputs
Switching Frequency: Up to 400kHz
Enable, Soft Start
PULSE WIDTH MODULATION
LTC1435AIS#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1435AIS#PBF DC to DC converter applications.
- Serial communication converter
- Servo drive system
- Power supplies of electronic gadgets
- Hydrogen power
- Fire elevators
- Analog precision reference circuits
- Energy management systems
- Overvoltage protection circuits in TV sets
- Game consoles
- Digital display device
