LTC1435CG#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1435 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 9V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 3.5V~30V |
| Control Features | Enable, Soft Start |
| Input Voltage (Min) | 3.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 400kHz |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 138kHz |
| Duty Cycle (Max) | 99% |
| Clock Sync | No |
| Height Seated (Max) | 2mm |
| Length | 6.7mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1435CG#PBF Overview
As a result of 16-SSOP (0.209, 5.30mm Width) compact design, the switching controller is compatible with most applications. 1 outputs can be generated with the dc motor controller. Tube is the solid enclosure in which PMIC is packaged. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sdc control's supply and operating voltages are 3.5V~30V. Worked in an dc switcher with a 0°C~70°C TA rating. A switching controller such as this can switch at a value of Up to 400kHz . The Surface Mount makes it ideal for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Enable, Soft Start. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Switching converters are designed with the terminal (s) at position DUAL . 16 terminations with various dc switching's functions. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. Searching "LTC1435" will return other relevant dc to dc converter ics. 16 pins are present on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. dc dc voltage regulators should have a minimum input voltage of 3.5V. According to the test statistics, DC regulator outputs 9V voltage. Voltages 30V are the maximum that the dc to dc regulator will accept. You should note that the dc dc regulator's usual output current is 2A. This Surface Mount makes DC switcher suitable for most prototypes and applications. DC regulator's maximum frequency is 138kHz.
LTC1435CG#PBF Features
Transistor Driver Outputs
Switching Frequency: Up to 400kHz
Enable, Soft Start
PULSE WIDTH MODULATION
LTC1435CG#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1435CG#PBF DC to DC converter applications.
- Domestic water pumps
- Flaw detection equipment
- Window air conditioners
- Game consoles
- Lathes
- Series voltage regulation circuits
- Automatic plug-in machines
- Post equipment
- Digital video recorders
- Machining centers
